Chemical Fume Hoods
Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.
Basic™ 47 and Basic 70 Laboratory Hoods, Labconco®
The Basic™ hood is ideal for rooms with ceilings below 2.4 m, 8" and for shallow countertops.
Expand 1 Items
Protector® Demonstration Hoods, Labconco®
Designed for classroom use, these lightweight hoods feature an epoxy-coated aluminum frame with tempered safety glass front sash, sides, rear baffle, and top.
Expand 4 Items
Basic 47 and 70 Fume Hoods
Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.
Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.
The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station,
Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.
Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor.
Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.
For assistance, contact your local sales representative
Expand 4 Items
Adjustable Height Base Stands, Labconco®
For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC Perchloric Acid, Protector Stainless Steel Perchloric Acid, Logic+, Logic, Cell Logic, PuriCare Procedure Stations and Protector Radioisotope laboratory hoods