DRE Volumax VOS Veterinary Oxygen System

The DRE Volumax VOS is designed to add warm moisture to breathing gases during respiratory ventilation. Suitable for use with large and small animals in a variety of care settings.

• Detachable and disposable patient circuit can be changed within five minutes for minimal downtime

  Built-in oxygen/air blender, electronic flowmeters and controllers

  All internal sensors are self-calibrating and self-monitoring

  Internal battery backup maintains flow and oxygen percentage for at least 15 minutes if AC power is cut off

  Temperature, flow and oxygen percentage are adjusted via a single setting control knob on the front panel

  Automatically senses cartridge type, maximum flow setting is automatically reduced is the low-flow cartridge if installed

  Large, easy to read panel displays all values and alarms

  Flow range: 1 to 40 lpm

  Warm up time is less than five minutes

  Universal power requirements allow for use in a variety of care settings

Circulating water volume: Approx 400 ml (including delivery tube and cartridge).

Water: Sterile water in pre-filled sealed container.

Mounting: Rear mounted clamp fits IV poles up to 1.5" diameter.

Gas Connections: Standard DISS non-interchangeable fittings for medical air and oxygen.

Gas Supply: Medical air and oxygen at inlet pressures between 4 and 85 psi (28 to 586 KPa).

Power: 100 to 240 VAC, 50 to 60 Hz, approx. 200 VA during warm up, approx. 80 VA in steady state (depends on flow rate and temperature).

Backup Power: (Qty 4) 4.8 V nickel-metal hydride AA batteries.

Dimension: 8W×7D×11.5"H

Weight: 10.6 lbs.