"Bel-Art"

Kit 'G' Mad Science Kit

The foam gasket plus two roller latches in the door maintain a tight seal for proper drying conditions and the clear door disappears neatly under the unit when opened.

Polypropylene funnel is chemical resistant and Steam autoclavable at 121 degrees Celcius.

Double density polyethylene bottles do double duty as a dropper bottle or as a spray bottle. Excellent for use with solutions or dyes.

Monitor Window Shows Blue When Recharged, Pink When Saturated.

Test tubes ‘Hang in There’ in any position, even inverted.

Store your slides securely with a minimal surface footprint.

Designed for fast and accurate one-handed operation, this pump will reduce the risk of injury from repetitive pipetting.

This generous assortment of 72 plastic fittings has everything you need for routine laboratory set-ups.

Low-density polyethylene bottles and spouts with sealer caps that snap on securely. Spout openings are standard 0.030" and can be enlarged with scissors.

Aids in the transfer of acids and reagents and virtually eliminates accidental bottle breakage and spills.

Precision hydrometer features 0.0005 divisions, 325 mm length, and metal ballast.

Molded Polyethylene.

A. Teflon® PTFE is inert, chemical resistant and steam autoclavable at 121°C (250°F) Dimensions: 254mm (10") long, 7.9mm (5/16") diameter rod. Per each
B. The thin 4.7mm (3/16") diameter rod handle is easy to maneuver with a gloved hand. Polypropylene is chemical resistant and steam autoclavable at 121°C (250°F) Length: 203mm (8") 6 per bag
C. The wide flattened end is ideal for larger work areas. The rod handle is 6mm (1/4") diameter and 203mm (8") long for easy handling. Large end is 25mm (1") wide. 6 per bag
A. Scrape and spread without scratching
• B. Molded flat end, cut diagonally, easily spreads and scrapes
• C. Steel reinforced polyethylene tool for aggressive scraping and spreading
Description: D. Stirring Rod
U/M: 6 per bag

Create dry ice on demand. Attach this compact unity to a liquid CO₂ cylinder and in a few minutes you'll have a ready-to-use 250 - 350 g block of dry ice.

Produce dry ice in flake or snow form efficiently and economically. Just screw the brass nozzle to an LCO2 cylinder, then open the cylinder valve. The liquid carbon dioxide expands through the cone and into the bag to form dry ice.