"Single Factor Water Test Kits"

Bioassays that Glow

This chemical test kit measures chloride by titration with mercuric nitrate. This test kit supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.

Ideal for low- to medium-range colorimetric analysis of water quality

CHEMetrics’ Manganese water test kits employ the periodate chemistry that measures soluble manganese compounds but does not differentiate the various valence states.

This chemical test kit that uses the phenanthroline method to measure total iron in the medium range. This chemical test kit is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests.

Titrets® test kits use reverse titration to quantify concentrations in aqueous samples

This chemical test kit uses an adaptation of the Nessler method to measure ammonia in fresh water. The test kit is supplied complete with all of the reagents and equipment necessary to perform approximately 25 tests.

This chemical test kit that uses the DPD method to measure total chlorine. The test kit is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests.

High-precision benchtop pH and ORP meter with advanced data logging and diagnostics.

This chemical test kit measures carbon dioxide by titration with sodium hydroxide. It is supplied complete with all of the reagents and equipment necessary to perform approximately 100 tests.

Designed for direct measurement.

Ideal for low- to medium-range colorimetric analysis of water quality

Set up an electrochemical cell using a variety of materials.

Ceric sulfate is the titrant and ferroin is the end point indicator. The method is free from glycol interference in samples that contain up to 75% glycol, making it particularly applicable to systems that contain nitrite corrosion inhibitors. Results are expressed as ppm (mg/L) NaNO2.

Test method: The Peracetic Acid CHEMets® test kit (0 to 1 and 0 to 5 ppm) employs the DPD chemistry. The sample is treated with an excess of potassium iodide. Peracetic acid oxidizes the iodide to iodine. The iodine then oxidizes DPD (N,N-diethyl-p-phenylenediamine) to form a pink colored species in direct proportion to the peracetic acid concentration. Various oxidizing agents such as halogens, ferric ions and cupric ions will produce high test results. Hydrogen peroxide does not interfere with this test if present at levels comparable to the peracetic acid levels.

Get accurate water testing results with the Free Chlorine colorimeter. With a digital read out, there is no more struggling to determine colors visually. This free chlorine tester's compact design fits in your pocket or stores easily in your shop.