Premoistened wipers are designed for environmentally sensitive areas, and are ideal for wiping optical parts, delicate glassware, electrodes, cuvettes, microscopes, and lenses.

These wipes are made from 55% polyester and 45% cellulose by hydroentanglement technology.

Wiper offers superior quality for aseptic environments where bacteria, particulate, and extractable levels are critical concerns.

Excellent for cleaning rough, abrasive or irregular surfaces, yet soft enough for delicate surfaces.

These are 100% continuous-filament, double-knit polyester fabric wipes.

Sterile wiper has superior quality for aseptic environments where bacteria, particulate, and extractable levels are critical concerns.

These Spec-Wipes are designed for cleaning laminar flow benches, cleanroom surfaces, and general process equipment.

Made of 100% double-knit polyester, delivering softness, high absorbency, strength, and abrasion resistance.

These non-woven wipers are suitable for use in critical environments, for absorbing spills of water and most common solvents, and for tasks such as cleaning laminar flow benches.

Durable wipers resist fiber release and abrasion under rigorous use, even when wiping rough surfaces.

These Spec-Wipes are excellent for cleaning rough, abrasive, or irregular surfaces, yet soft enough for delicate surfaces.

SterileSorb™ Wipes are a hydroentangled blend of 55% cellulose and 45% polyester. They are highly sorbent with excellent durability and good cleanliness. SterileSorb™ wipes are strong and durable wet or dry, making them excellent for use in general cleaning and spill pick up.

The Amplitude™ Sigma™ Plus wipes are strong and durable, compatible with most solvents, and have outstanding sorbency.

ReFIBE wipes are made from 100% recycled plastic bottles, making them a sustainable single-use option for critical manufacturers in the life sciences, pharmaceutical, medical device, and semi-conductor industries. The revolutionary recycling process converts post-consumer plastic to 100% continuous filament polyester, the same substrate used in many of standard polyester wipes and mops.

Maximize contamination control with Vileda® wipes! The microfiber EvoControl cleanroom wipes fulfill the highest demands for cleanroom wiping, plus EvoControl provides revolutionary wiping results thanks to its unique microfiber structure.

Polywipe-C heatseal wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe.

Anticon® MicroQuilt combines the cleanliness and sorbent capacity of Quiltec® with the microfiber particle pick-up ability of Anticon® Gold Sorb. This hybrid creates the most sorbent, cleanest wipe Contec® offers.

SATWipes® Delta™ wipes consist of a perforated roll of saturated wipes dispensed through a center-pull canister. The wipes are 100% nonwoven polyester fabric creating a soft, durable, and clean wipe.

Anticon Guardrail® G2 wipes are made from 100% continuous filament polyester that has a four sided sealed border. Using the patented Particle Attraction Technology (PAT) system, the wipe attracts and retains more particles than a traditional cleanroom wipe, making it ideal for critical cleaning tasks.

The Twill Jean Wipe is a 100% cotton fabric wipe, woven in a 2×1 twill construction.

Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean, non-abrasive edge that allows full utilization of the wipe surface.

Klerwipe™ Neutral Detergent Pouch Wipes are sterile non-woven, low particulate wipes impregnated with a neutral, non-ionic detergent in a convenient resealable pouch.

The Amplitude heavy weight wipe is constructed from 100% textured polyester knit.

Polynit Wipes are made of 100% knitted textured polyester with knife cut edges for a very soft wipe. The soft edge is ideal for use on surfaces which are vulnerable to scratching.

Klerwipe™ 70/30 IPA pouch wipes are sterile knitted, 100% polyester wipes impregnated with 70% v/v Isopropyl alcohol blended with Water For Injection (WFI).

These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT® Theta™ wipes offer a soft and durable wipe providing consistant solvent application.

Polywipe-C 'Blue InspectR' wipes are specifically designed to reveal particle contaminants picked-up from wiped surfaces.

The SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester creating highly sorbent and durable wipe.

Klerwipe™ Low Residue Peroxide Mop Wipes are sterile ready-to-use mop wipes for high-grade cleaning with minimal residue. The non-woven, low particulate wipes are made from hydroentangled polyester/cellulose and impregnated with 6% Hydrogen Peroxide.

Anticon 100® HeavyWeight™ Wipes are made from 100% continuous filament polyester with a double-knit no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching.