An extensive line of acrylamide and bis-acrylamide pre-weighed powder blends, premixed stock solutions and ready-to-use solutions for customized polyacrylamide gel electrophoresis of proteins and PAGE of nucleic acids. Ultra-pure (>99.9%) acrylamide and bis-acrylamide powders provide the flexibility to prepare solutions having concentrations and ratios for all electrophoresis applications. Liquid blends minimize the handling of neurotoxic acrylamide.

Agarose I™ is for routine nucleic acid analytical/preparative applications.

A quality general application agarose that provides good resolution and is cost-effective for high volume users.

Agarose SFR™ (Super Fine Resolution) is a high resolution sieving agarose with excellent clarity. DNA bands differing in size by 2% can be resolved in the range of 200 bp to 1000 bp.

VWR® Cyclo-Pure™ Agarose Gel Extraction Kit is a fast, spin column-based kit for the quick isolation of DNA fragments (40 bp - 100 kb) from agarose slices. In just 10 minutes, ultra-pure DNA can be extracted that is ready-to-use in restriction enzyme digestion, labeling, ligation, transformation, in vitro transcription and sequencing protocols. All reagents are room temperature stable.

CulGenex™ Agarose LE, Molecular Biology Grade is recommended for use in the preparation of an electrophoresis gel for the analysis of nucleic acids and proteins

Immobiline™ DryStrip gels (IPG strips) are used for isoelectric focusing (IEF), run as the first dimension of 2-D electrophoresis or as a separate application. IPG strips contain a preformed pH gradient immobilised in precast polyacrylamide gels on a plastic backing. A comprehensive range of overlapping IPG strips covering narrow, medium, and wide pH ranges are available in various strip lengths, and the strips are individually packaged and bar coded for convenient handling and sample tracking.

Thermo Scientific Pierce Agaroses are highly purified and carefully blended formulations of low-melting agarose that provide uniform lot-to-lot consistency for preparation of electrophoresis gels.

OmniPur® acrylamide bis-acrylamide, 29:1, 40% solution, is suitable for nucleic acid and protein separation sequencing. Premixed solutions offer standard ratios of acrylamide to bis-acrylamide for convenience and safety. The hazard of handling powdered acrylamide is eliminated with the 40% solution in water. Reconstitute with deionized H₂O to desired final percentage.

Pulse Field Gel Electrophoresis Agarose is a linear polymer with a high molecular weight, creating gel structures unlike those of standard agarose

G-Biosciences ready-to-use gel drying solution effectively and evenly dries protein electrophoresis gels by the mechanism of passive evaporation and is suitable for permanent gel storage and densitometry.

Low Melting Point Agarose is commonly used as a gel matrix when fragment recovery is desired after electrophoresis

GenScript's Bis-Tris gels are high-performing polyacrylamide gels designed to separate a wide range of protein sizes by electrophoresis. The gels are cast in a neutral pH buffer that minimizes polyacrylamide hydrolysis and increases gel stability. Furthermore, the neutral pH which minimizes protein modification when compared to Tris-glycine gels.

Precast Latitude® midigels TBE are made for accurate DNA fragment separation for most any gel electrophoresis application. They are manufactured from high quality, Lonza molecular biology grade SeaKem® LE Plus Agarose.

Lambda PFG Ladder consists of one GelSyringe™ dispenser, sufficient for 50 gel lanes

NuSieve® is a high strength agarose perfect for analytical electrophoresis of small DNA/RNA fragments and In-gel PCR/Transformation/Ligation.

SeaKem® is a high gel strength, low EEO, standard gelling temperature agarose perfect for electrophoresis and other molecular biology applications.

The same agarose you've always trusted for your electrophoresis is now available in a convenient, no mess tablet.

Thermo Scientific Pierce Agaroses are highly purified and carefully blended formulations of regular that provide uniform lot-to-lot consistency for preparation of electrophoresis gels.

Prepared with TBE buffer, these gels are easy to use — simply melt them in a microwave oven or water bath then pour them into a casting tray. The non-reusable gels have a one-year shelf life and should be stored at room temperature.

Agarose in convenient tablet format - no weighing required!

All-in-one tablets with pre-measured agarose, TBE, and SeeGreen™ stain.

DIGE Gels LF24 are large format precast 12.5% polyacrylamide gels with low fluorescent glass plates intended for 2D DIGE and 2D DIBE™.

Reliant™ Precast DNA Gels are ready-to-use DNase free agarose gels suitable for a variety of DNA applications such as the analysis of PCR, restriction digest fragments and most cloning needs

Ideal for checking restriction digests and PCR products.

Precast gels incorporate a unique formulation allowing protein bands to be visualized in only two minutes in the presence of ultraviolet (UV) light

Provides clearer DNA bands and more resilient gel (20 g—40 standard gels).

Ideal for student skill practice.

Simply melt in microwave, water bath or autoclave; cool and pour into gel bed (400 ml—six standard gels).

IBI Molecular Biology agarose products are highly refined and highly purified