Supports are designed to hold specific-sized samples and equipment for safe reaction testing procedures. With strong construction, the devices act as protective barriers to keep the benchtop surface and handlers safe from intensely heated samples or harsh solvents. Stands will also precisely position the supplies for specific requirements and allow researchers both hands for maximum working efficiency. The supports give employed instruments the stabilization needed for a controlled and accurate analysis.
VWR® Ring Supports, Laboratory
Ring supports are made of compressed cork for supporting flasks or dishes.
Expand 5 Items
VWR® Neoprene Flask Underlay
Moderate heat and oil resistance with concave recess on top to support round-bottom flasks and dishes.
Expand 1 Items
VWR® Neoprene Crucible Holders
These neoprene crucible holders are tapered, collar-type holders.
Expand 6 Items
VWR® Talon® Clamp Replacement Sleeves
Replacement sleeves are easily removed for cleaning or replacement.
Expand 7 Items
Open Ring Support, Ace Glass
This Flexaframe open ring support can be held by conventional laboratory clamp holders
Expand 3 Items
Large Scale Spherical Reaction Flask Support Stand, Ace Glass Incorporated
200L SPHER SUPPORT ASSEMBLY.
Expand 1 Items
Flask Support, Polypropylene, Ace Glass
Round-bottom flasks of any size up to 10,000mL are cradled securely in the stepped concentric rings of this support
Expand 1 Items
SP Bel-Art Round-Bottom Flask Support, Bel-Art Products, a part of SP
Round-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder that can be stacked together for convenient storage.
Expand 1 Items
Process Pipe Padded Hanger With Mounting Foot, Ace Glass Incorporated
Beaded Process Pipe Padded Pipe Hanger With Mounting Foot.
Expand 3 Items
Replacement Sleeves for Laboratory Clamps, Ace Glass
Red vinyl or fiberglass (high temperature) replacement sleeves are available in three grip sizes for two or three prongs
Expand 10 Items
PYREX® Cylinder Bumper Guards, Corning
Polyethylene shock-absorbing rings can reduce breakage of glass cylinders
Expand 4 Items
SP Bel-Art Flaskup™ Flask Holders, Bel-Art Products, a part of SP
These unique holders are perfect for keeping round and tapered bottom flasks upright.
Expand 4 Items
Drive Sleeves
Replacement drive sleeve for Frac30 fraction collector used with AKTA start, Used on the drive bushing to prevent bowl slippage
Expand 1 Items
Insulating Blankets, Pilot Plant, Ace Glass Incorporated
Fabric insulating blankets for jacketed pilot plant flasks
Expand 5 Items
Nalgene® Vacuum Gasket for Filter Funnels, Thermo Scientific
Replace No.7 or No. 8 stoppers in any manifold or filtering flask with the Nalgene™ Vacuum Gasket for Filter Funnels.
Expand 1 Items
Plastic Bumper, KIMBLE®, DWK Life Sciences
When placed around a cylinder near the top, this sturdy split ring protects against breakage if the cylinder is upset
Expand 1 Items
Tripod Support Stand for 100 and 150 mm Columns, Ace Glass Incorporated
Tripod support for bottom of Ion-exchange columns
Expand 1 Items
Extension Support, Ace Glass Incorporated
Provides convenient supports for flasks up to five-liter capacity
Expand 5 Items
Tilting Support, Glas-Col, Ace Glass Incorporated
This is a tilting support that provides a finger tip method of emptying flasks by pouring
Expand 8 Items
Lab Stand Support Shelf, Ace Glass
Lab stand support shelf fits any stand with up to 5/8" O.D. rod. Rod-mounted, and features a 5/8" O.D. × 12" long stainless rod with a through hole.
Expand 2 Items
Support Tripod, Glas-Col, Ace Glass Incorporated
This tripod is used for 5 L, 12 L, and 22 L heating mantles with a soft glass outer covering instead of spun aluminum.
Expand 3 Items
Extension Support, For Heating Mantles, Ace Glass Incorporated
For heating mantles up to 5,000 mL capacity
Expand 7 Items
Cork Rings, Ace Glass Incorporated
Fine-composition cork rings ideally suited for general laboratory use to support flasks, beakers, dishes
Expand 5 Items
Padded Process Pipe Pipe Hanger Without Foot, Ace Glass Incorporated
All hangers are zinc coated and have factory applied plastic sleeve to prevent glass-to-metal contact
Expand 7 Items
ErgoClip Flask Micro Balances Holder
ErgoClips micro can be easily assembled on XP26 and XP56 Micro Balances allowing one step dosing directly into the tare container.
Expand 1 Items
CHEMRXNHUB™ Triple Support Stands, Benchtop Reactors, Chemglass
Supports (3) reactors side/side from 300 ml to 5 L. This unique stationary reactor stand is designed to fit into most benchtop hoods.
Expand 1 Items
Mantle Extension Support, Series M, Glas-Col®
Steel ring with 15.2 cm (6") shank. Gray finish support mantles to 5 L.