Advanced Ripple Tank with Projection Mirror, 21.1lbs, 24.4x15.4x9.4in, Includes: (1) Vibration Generator, (1) Wave monitor unit, (1) Projection screen, (1) Wave dippers, (1) Lever arm and support, (1) Ripple tank, (1) Projection mirror, (1) Set of footers with adjustment screws
Organ Pipe Polished Wood, With Movable Piston Marked With The Chromatic Scale From C (512) To (1024), Overall Length When Fully Extended 880 mm May Be Used For Investing The Phenomenon Of Beats In Conjunction With A Second Pipe Of The Same Type.
ultrasonic Continuous Wave Generator With Probe, Power Consumption: 5-60 Va; Failure at 100 Va, Mains Voltage: 90-230 V, 50/60 Hz, Fuse: T630 Ma at 115 V; T315 Ma at 230 V, Generator Frequency: </=20 Mhz, Frequency Increment: 1 Hz
Meldes Vibrating String Apparatus, consists of a string and an oscillator to generate different frequencies, Requires 6 V, 50 Hz power source, with 4mm plug leads, Weight (lb): 1.4, Length (in):11.0, Width (in):6.0, Height (in):3.0
Tuning Fork Set Of 8 With Hammer, With Foam Lining For Easy Storage Of All Parts. Frequency Marked 256Hz, 288Hz, 320Hz, 341Hz, 384Hz, 426Hz, 480Hz & 512Hz. Complete With Hammer.
Aluminum Tuning Forks, Set Of 8, Includes: (8) Tuning Forks, Best Quality Nickel-Plated, Plain Shanks, With Frequency Marked, C (256), D (288), E (320), F (341), G (384), A (426), B (480), C (512). Set Supplied In Wooden Case.
Mat for the Resonance Bowl The 7in (180mm) round mat can withstand up to 250C (480F).prevent slipping and allows for larger standing waves by preventing vibrations from transferring to the table.
Vibration Generator Set, mechanical vibration and wave motion apparatus based on a vibration generator that can be used with any frequency generator that can deliver a signal of up to 1A, used on the bench or attached to stand material via a threaded socket on the bottom
Assorted Large Drilled Ball Set, set of 12, A 3mm hole is drilled through the center of each ball. Every set comes in a convenient plastic storage case, with a foam bottom that holds each ball firmly in place
Resonance Apparatus, Acrylic tube approx. 98 cm long and 2.5 cm diameter mounted on retort stand with clamp and boss, with metal vessel, connecting tubing and spring clip supported on iron ring. Dimensions: Weight (lb) 4.8x Length (in)39.0xWidth (in)3.9xHeight (in)3.1
Tuning Forks Set Of 8 Steel, For Physics Experiments, Includes: (8) Tuning Forks Nickel-Plated, Plain Shanks, With Frequency Marked, C (256), D (288), E (320), F (341), G (384), A (426), B (480), C (512). Set Supplied In Wooden Case.
Sonometer Wire, 1.3lbs, 9.8x6.7x6.3inch, Set of six wires, brass and steel, length 1.5 m, Set of six wires, brass and steel, length 1.5 m of 22, 24, 26 SWG. Ends looped ready for use.
Diffraction Grating Slides, 1000lines/mm, Highly efficient embossed Holographic Optical Elements, For the direct viewing and analysis of spectra from different gas tubes and other light sources, Use in conjunction with colored film gels, Dimension: 2x2in
ultrasonic Probe, Dimensions: 65 mm X 27 mm Dia, For Use With ultrasonic Echoscope, Includes A 16-mm Piezo-Ceramic Disc In A Die-Cast Metal Case And A 1-M Long Cable With A Frequency-Coded Snap-In Plug, Equipment Is Adapted To Sound In Water/Acrylic, 2 Mhz.
Tuning Fork Octave, 8Pk C (256Hz) - C (512Hz), Steel Tuning Forks For Physics Experiments, May Be +/- 5% Of Stated Frequency, Includes: (8) Tuning Forks, Nickel-Plated, Plain Shanks, With Frequency Marked, C (256), D (288), E (320), F (341), G (384), A (426), B (480), C (512)
Diffraction Grating Glasses, 500lines/mm, Highly efficient, Single axis holographic diffraction grating lenses separate light from any source into its spectral components for study/analysis, Used with Power Supply/ Spectrum Gas Tubes, Make study of light easy
Doppler Effect Demonstration Apparatus, 92dB buzzer, 0.8m tether. Nylon cord is 2ft 8in attached to a rugged ABS handle 8.5in long, (1in diameter), Swing the apparatus and students will be able to hear the change in frequency, Dimensions: 4.5 x 5 x 3 in
Vibration Generator, Variable Frequency From 1 Hz To 300 Hz,Vibration Generator Provides The Electronically Controlled Vibrations To Generate The Tender Ripples. This Can Work On Square Wave Generator Of Amplitude Adjustable Upto 12V Max & Is Able To Deliver 15 Watts Of Power.
ultrasonic Probe, Dimensions: 65 mm X 27 mm Dia, For Use With ultrasonic Echoscope, Includes A 16-mm Piezo-Ceramic Disc In A Die-Cast Metal Case And A 1-M Long Cable With A Frequency-Coded Snap-In Plug, Equipment Is Adapted To Sound In Water/Acrylic, 1 Mhz.
Stroboscope, A Hardboard Disc With Twelve 50 X 3 mm Slots And Finger Hold, Pivoted On A Ball Bearing Mount Which Also Acts As A Convenient Handle. Diameter Of Disc 255 mm
Ct Scanner, Linear Movement: Max. 400 mm, Local Resolution: <10 um maximum, Speed Of Movement: 18 Cm/Min, Turning Angle: 0-360 deg, Angular Resolution: 0.225 deg, Maximum Angular Velocity: 1 Rpm, Dimensions: 210X353X520 mm3, For The Purpose Of Generating Tomographic Images.
Model, Multiple pendulum Demonstration, consists of a large acrylic frame and nine pendula with 1 in steel ball, initiator stick to simultaneously release all pendula
Pair Of Tuning Fork - Steel, Includes: (2) Tuning Forks With Bases, One Is Adjustable (1) Mallet, For Demonstrating The Production Of Beat Frequencies. Comprises Two Nickel Plated Forks A (440 Hz) Mounted On Individual Boxes