Premium Clamp - Three Finger with Bosshead, Clamp constructed of powder coated steel, 3 finger rubber coated clamp attached to swivel boss head. Maximum clamp opening is 8.5cm, Boss accommodates to 18mm rod
Premium Bosshead - Die Casted, Right angle Clamp Holder, Classic Die Cast Alloy, finished in non toxic powder coating, 2 Stainless Steel Thumb Screws, Able to hold rods up to 15 mm in diameter, Holds rods orthogonal (90 degrees) to one another
Premium Bosshead - Square Head, Industrial Series Classic Die Cast Alloy Bosshead, up to 15 mm Rods, Threaded metal one piece clamping screw, Holds rods orthogonal (90 degrees) to one another
Premium Clamp - Two Prong with Bosshead, Heavy duty spring loaded clamp jaw with dual screw adjustment to fine tune any fitting, 2 Vinyl Coated Clamp Tongs, 7 cm maximum clamp opening, Bosshead accepts up to 18 mm rods
Premium Clamp - Three Finger with Bosshead, Clamp constructed of powder coated high grade zinc alloy, 3 finger vinyl coated clamp attached to swivel bosshead, Maximum clamp opening is 8.5 cm, Swivel between Clamp and Bosshead, Boss accommodates to 18 mm rod
Premium Clamp - Three Prong with Bosshead, Made of high grade zinc alloy and powder coated alloy with all metal adjustment screws, 3 Vinyl Coated Clamp Fingers, 6 cm maximum clamp opening, Bosshead accepts up to 18 mm rods
Premium Bosshead - Heavy Duty, Industrial Series Heavy Duty Powder Coated Bosshead for rods up to 16 mm, Thicker than normal 7 mm threaded clamping screws, Thicker casting to support more load, Accepts up to 16 mm rods, Made of high strength powder coated alloy
Chemistry Lab Starter Set, Includes Base and rod, double burette clamp, 75 and 100mm rings, 2 and 3 prong clamps, Boss head, tripod stand, Bunsen burner, tubing 150 mm wire gauze.
Premium Clamp - Three Finger, Clamp constructed of powder coated high grade zinc alloy, 3 finger cork lined clamp attached to a stainless steel rod, Maximum clamp opening is 8.5 cm, Stainless Steel Connecting Rod 14cm, connecting rod 10 mm Diameter.
Premium Clamp - Three Prong with Bosshead, Vinyl Coated Extension Lab Clamp, 8.5 cm maximum clamp opening attached to High Strength Alloy swivel bosshead, Boss accommodates to 18 mm rod
Epoxy-coated, steel wire test tube rack resists most solvents, weak acids and bases. Withstands temperatures up to 121 C. Holds 36 Tubes, size 13mm. 6X6 Format
Epoxy-coated, steel wire test tube rack resists most solvents, weak acids and bases. Withstands temperatures up to 121 C. Holds 80 Tubes, size 20mm. 8X10 Format
Premium Clamp - Two Prong with Bosshead, Heavy duty spring loaded clamp jaw with dual screw adjustment to fine tune any fitting, 2 Vinyl Coated Clamp Tongs, 7 cm maximum clamp opening, Bosshead accepts up to 18 mm rods, mounted on swivel boss head
Epoxy-coated, steel wire test tube rack resists most solvents, weak acids and bases. Withstands temperatures up to 121 degree C. Holds 24 Tubes, size 16mm. 4X10 Format
Epoxy-coated, steel wire test tube rack resists most solvents, weak acids and bases. Withstands temperatures up to 121 degree C. Holds 20 Tubes, size 22mm. 4X10 Format
Epoxy-coated, steel wire test tube rack resists most solvents, weak acids and bases. Withstands temperatures up to 121 C. Holds 80 Tubes, size 25mm. 8X10 Format
Epoxy-coated, steel wire test tube rack resists most solvents, weak acids and bases. Withstands temperatures up to 121 C. Holds 72 Tubes, size 16 mm. 6X12 Format
Epoxy-coated, steel wire test tube rack resists most solvents, weak acids and bases, Withstands temperatures up to 121 degreeC, Holds 20 Tubes, size 20mm.
List View
Easy View (new)
