Kits de tests environnementaux

The ammonia test kits employing the well-established Nessler reagent to determine ammonia concentrations are applicable to drinking water, clean surface water, and good-quality nitrified wastewater effluent.

Ideal for low- to medium-range colorimetric analysis of water quality

Hydrogen Peroxide CHEMets® used to to monitor sterilisation solutions in the packaging and sanitizing processes.

Ideal for low- to medium-range colorimetric analysis of water quality

Keep it simple with these easy-to-use, individual water test strips

This kit requires the use of the V-2000 or V-3000 Photometer, a SAM Photometer or a spectrophotometer capable of accepting a 13 mm diameter round cell.

This kit tests for turbidity using a turbidmetric card used match clarity to your sample.

The LaMotte ColorQ meter is a simple way to test low and high concentrations of chlorine.

Refill for The Comprehensive Water Monitoring Kit 470004-240 and LaMotte® TesTab® Water Investigation Kit 470007-270

This chemical test kit measures chloride by titration with mercuric nitrate. This test kit supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.

This chemical test kit measures carbon dioxide by titration with sodium hydroxide. It is supplied complete with all of the reagents and equipment necessary to perform approximately 100 tests.

This chemical test kit uses an adaptation of the Nessler method to measure ammonia in fresh water. The test kit is supplied complete with all of the reagents and equipment necessary to perform approximately 25 tests.

This chemical test kit that uses the phenanthroline method to measure total iron in the medium range. This chemical test kit is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests.

The replacement reagents for the iron tester sold seperatly. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.

The NED method is widely used in the quantitative analysis of nitrite and nitrate in water samples. NED readily undergoes a diazonium coupling reaction in the presence of nitrite to give a strongly colored pink azo compound. The intensity of the color is directly proportional to the concentration of nitrite in the sample. Due to the significant intensity of the developed color even at very low nitrite/nitrate concentrations, lower detection limits and measurement ranges are possible vs. chromotropic acid kits. In addition, the nitrate measurement uses only zinc which is less toxic than cadmium, making handling and disposal safer.

The NED method is widely used in the quantitative analysis of nitrite and nitrate in water samples. NED readily undergoes a diazonium coupling reaction in the presence of nitrite to give a strongly colored pink azo compound. The intensity of the color is directly proportional to the concentration of nitrite in the sample. Due to the significant intensity of the developed color even at very low nitrite/nitrate concentrations, lower detection limits and measurement ranges are possible vs. chromotropic acid kits. In addition, the nitrate measurement uses only zinc which is less toxic than cadmium, making handling and disposal safer.