"Vernier Accessories"

These dowels are used for designing and testing wind turbine blades and fit into the Wind Turbine Hub.

This balsa wood is pre-shaped in an airfoil shape.

An extra flow head eliminates the need for equipment downtime while sterilizing an original flow head. The flow head consists of a polycarbonate outer body with a stainless-steel inner mesh.

Most of the Vernier sensors have cables that are 1.5 m long.

The Motion Detector Clamp screws into the back of the Motion Detector, and then can be clamped to a variety of objects such as table tops, ring stands, etc.

You can use our Heart Rate Hand Grips in conjunction with the Polar Transmitter Module. This option eliminates the need for a chest belt and allows students to measure their heart rate from the palm of their hands.

The Breadboard Cable (Analog) provides an easy way for students to build their own sensor circuitry and input the signal into a Vernier interface for data acquisition.

Chipboard is a stiff, easy to cut, lightweight, low cost, and recyclable material used to make simple wind turbine blades.

Allows the Dual-Range Force Sensor to be mounted on the end of an air track for collision studies. Compatible with most air tracks distributed or made by PASCO scientific, Central Scientific, or Daedalon Corporation. Includes two magnetic bumpers.

Step-by-step experiments that are easily executable.

With the Vernier Variable load, students can adjust the potentiometer to provide resistances between 6 and 255 Ω, allowing them to determine the optimal load on a system.

Detect radiation and measure decay rates.

All you need to add is a wind source, basic tools, and imagination!

Demonstrate Newton's laws of motion.

The KidWind Motor Mount Pack holds the motor (generator) in place when affixed to the wind turbine nacelle. The Motor Mount Pack can be used to replace lost parts from a nacelle. It can also be used to mount a nacelle to the tower for a vertical axis wind turbine configuration.

Need a tower for your turbine nacelle? This is the same tower that comes in the Basic Wind Experiment Kit and the Advanced Wind Experiment Kit. The wooden tower has a diameter that fits inside 1-inch PVC fittings.