Bar Breaking Apparatus, Comprising A Heavy Cast Iron Frame 340 X 120 X 100 mm With Slotted End Pillars To Carry A Stout Iron Bar, To Show The Forces Which Can Be Exerted During Thermal Expansion Or Contraction, The Bar Is Threaded At One End For A Large Tensioning Nut
Moment Of Force Apparatus, Consists A Meter Stick, Three Knife Edge Clamps, An Aluminium Support, Two Mass Hangers, Eight Slotted Masses From 1 - 500 G And Storage Rack, Shows The Relationship Between Moment Of Force, The Amount Of Force And The Length Of The Lever Arm
Resonance Tube Apparatus, Long version, Material: Acrylic, Mounted on retort stand with clamp and boss, with metal vessel, connecting tubing and spring clip supported on iron ring, Dimension: 120cm
Parallelogram Of Forces Apparatus, Apparatus Demonstrates The Relationship Between Forces Acting At A Point, Comprised Of: A Board 25.5in X 19.7in, Two Aluminum 50mm Diameter Pulleys On Clamps, Three Iron Nickel Plated Hangers, Twelve Slotted Weights
Collision In Two Dimensions, Consists Of A Curved Track With A Base At One End. On The Base Is A Support To Hold A Ball At The Proper Height For A Center To Center Collision, Consists Of 25Cm One Piece Track, 3 Balls 12mm Diameter, 2 Steel, 1 Glass And 1 Plumb Bob.
Wave Apparatus - Plastic, Demonstrate Longitudinal And Transverse Waves, Advanced Apparatus Demonstrates Both Longitudinal And Transverse Wave Motions. Consisting Of A Number Of Eccentric Discs Supporting A Series Of Metal Rods Revolving On A Handle
Induction Tube Apparatus With 6 Coils, Tube Dimensions (L X D): 1500 X 20 mm, Coil Width: 10 mm, Distance Between Coils: 19 Cm, Due To The Magnet'S Free-Fall Acceleration Caused By Gravity, The Voltage Peaks Increase Proportionally With The Time.
Second Law Of Motion Apparatus, 25 Cm Long Unit Has A 10 mm Rod. It May Be Horizontally Clamped To A Support Stand Or Table Clamp. Complete With Two Steel Balls, Substantial Metal Casting And The Entire Mechanism Is Visible, The Spring Gun Offers Two Tensions
Maxwell Apparatus, Supplied With Stand, 90mm Dia, Metal Wheel Fitted On Stand Explores Gravitation Momentum, Maxwell Apparatus With Stand Consisting Of Metal Wheel With Side Latching For Peripheral Mass. Concentration Via Wheel Center Passing Through A Shaft
Resonance Apparatus, Acrylic tube approx. 98 cm long and 2.5 cm diameter mounted on retort stand with clamp and boss, with metal vessel, connecting tubing and spring clip supported on iron ring. Dimensions: Weight (lb) 4.8x Length (in)39.0xWidth (in)3.9xHeight (in)3.1
Convection Of Gas Apparatus, Small, Ventilation Apparatus, Smaller Sized To Fit In Any Classroom Than Standard Convection Of Gas Apparatus, Comprised Of A Metal Box 4inX6inX4in With A Sliding Front Door, Two Glass Chimneys And A Candle Holder.
Hook'S Law Apparatus - Student, Supplied With Weights, Scale Marked In mm, Includes Experimental Notes, Wooden Base, A Hook Supporting A Coiled Spring With A Mass Hanger And Indicator Is Attached To Rod, 10G Weight Plates Included
Induction Apparatus, Operating Voltage: 2-12 V, Dcframe Coil: Approx. 185X125 mm2, Total Dimensions: Approx. 585X200X55 mm3, Demonstrating The Induced Voltage In A Frame Coil That Is Moved Through The Magnetic Field Produced By A Magnet Plate Of Limited Area.
Hareft s Apparatus, Mounted on a wooden stand with a scale, comprises a three-limbed glass tube with rubber tubing on the centre. For comparing the densities of liquids by measuring the height of two columns of liquid produced by applying suction, Dimensions 68 x 30 x 15 cm
Oersted's Apparatus, demonstrates the action of electric current on a magnet. A cobalt steel needle (75mm long) with agate bearing supported by pivot, mounted on a plastic base and surrounded by rectangular frame fitted with terminals, 0.6 lbs, 8.0x7.5x1.8in